Our steel stockholding is comprehensive to enable fast turnaround on deliveries when required. Products we stock comprise of general steels, engineering steels, bright steels, sectional steel, sheets and plates. You can have full confidence in the Pulmans team as our staff has a vast knowledge of, and a wealth of experience within the steel supply industry. This is vital when working with challenging projects with tight deadlines as you need to be sure that the products ordered are delivered on time.
Our steel is used within a diverse range of sectors including fabricating, sheet metal, construction and quarrying, engineering, storage, oil and gas, transport, aerospace, rail, handrails and walkways, offshore and renewable energy and recycling amongst others.
Amongst other sizes our stock is available in the following:
Black Rounds – from 6mm Dia to 300mm Dia
Black Squares – from 8mm square to 100mm square
Black Flats – from 13 x 3mm to 300 x 25mm
Black Angles – from 16 x 16 x 3 to 200 x 150 x 12mm
Bright EN8 rounds – from 12mm Dia to 100mm Dia and ½” Dia to 3” Dia
Bright Free Cutting rounds – from 8mm Dia to 100mm Dia and ¼” Dia to 3” Dia
Bright M.S Flats – from 20 x 10 to 125 x 6 and ¼” x 1/8” to 10” x ¼”
Bright M.S rounds – from 6mm Dia to 100mm Dia and 1/8” Dia to 6” Dia
Bright M.S squares – from 10mm sq to 80mm sq and 3/8” sq to 4” sq
RS Channel – from 40 x 20mmm to 430 x 100mm
CHS – from 26.9mm o/d x 3mm to 219.1 o/d x 8mm
Floor Plate – from 2500 x 1250 x 3mm o/p to 3000 x 1500 x 10mm o/p
ERW Round Tube – from ½” o/d x 16g to 3” o/d x 16g plus metric sizes
ERW Tube – from ½” x ½” x 16g to 2” x 2” x 16g plus metric sizes
Galvanised Sheets – from 2000 x 1000 x 0.7 thick to 3000 x 1500 x 3mm thick
Cold Reduced Sheet – from 200 x 1000 x 0.8mm thick to 3000 x 1500 x 3mm thick
Hot Rolled Sheet – from 2000 x 1000 x 1.6mm thick to 3000 x 1500 x 2.5mm thick
Zintec Sheets – from 2000 x 1000 x 0.9mm thick to 2500 x 1250 x 3mm thick
Plates – from 3mm thick to 180mm thick in M.S and S355 grades
Engineering Bar (EN24T) – from 60mm Dia to 200mm Dia
Engineering Bar (EN8) – from 70mm Dia to 300mm Dia
Engineering Bar (M.S) – from 80mm Dia to 300mm Dia
Hollow Section – from 20 x 20 x 2mm to 250 x 250 x 12mm
Beams and Columns – from 127 x 76 x 13kg/m to 406 x 178 x 74kg/m
We also keep ranges of Tees, Tubes, Welded mesh, Walkway, and other Engineering grades.